How to Grow and Care for Beautiful Indoor Water Plants

Planting and caring for indoor water plants is quite simple. However, it is also necessary to have its own technique to keep the tree growing and green.

In the following article, we will show you how to grow simple indoor water plants at home!

Advantages of indoor water plants gardening

Placing a pot of water plants on the table helps to bring in air and creates an aesthetic space, helping us to feel relaxed after a stressful and stressful working life.

Many plants have the ability to purify the air very well and can also absorb harmful substances.

In particular, some plants have the ability to absorb computer radiation, such as areca nut, tiger tongue, aloe vera, spider wire, etc.

Materials needed for preparation for planting indoor water plants

Indoor-Water-Plants-Material

The materials that must be prepared when planting indoor water plants are as follows:

  • You should choose some common indoor water plants such as water aloes, anthuriums, needles, and orchids that you like.
  • Choose a glass vase with a wide stem so that the plant roots develop well, do not overlap, and die easily.
  • Nutrient solutions for indoor water plants.
  • Scissors, clean water, gravel, marble, and colored stones.

How to grow unique indoor water plants

How to grow indoor water plants with the root washing method

Root-Method-Indoor-Water_Plants

Here is a simple way to grow table water plants as follows:

Step 1: You need to choose healthy and beautiful potted plants. Then remove it from the pot and use water to clean the dirt stuck to the roots.

Step 2: Prune off damaged and rotten roots. For plants with well-developed roots, cut them in half. This process helps plants grow faster and promotes faster absorption of nutrients.

Step 3: After pruning the roots, you should soak them in a 0.05% – 0.1% Potassium permanganate solution for about 30 minutes. Continue to put the plant in the glass jar, using washed gravel to keep the roots intact.

Step 4: Continue pouring the water or solution into the jar with the amount about halfway submerged in the roots, leaving the top in the air.

Step 5: Finally, change the water daily until the plant grows white roots, then reduce it several times.

How to grow indoor water plants by cuttings into the water

Cutting-Indoor-Water-Plants

The cuttings in water method is a simple but very effective planting indoor water plants technique.

Utilizing the regenerative power of plants, cut some twigs or branches of the parent plant, then put them in the water.

These branches will develop roots, and young shoots, to form a new tree. Here are ways to grow indoor water plants by cuttings in the water as follows:

Step 1:

Choose healthy, pest-free plants. Choose a healthy branch, and use a knife to cut close to the base, about 0.3-0.5 cm from the base.

Since the oldest branches are avoided in this position, cuttings and main stems are selected.

Step 2:

Before cutting off the cut branches, it is necessary to wash the cuttings thoroughly.

Remove all the leaves at the bottom, then quickly plunge the branches into the water, avoiding dehydration and affecting plant viability.

When cutting branches with aerial roots, it is necessary to protect the aerial roots well, as they can be turned into nutritious roots and at the same time have the effect of keeping the tree upright.

Step 3:

When cutting branches, cuttings should be left in a shady and ventilated place for 2-3 days.

Fill a glass jar with water so that the water level is 1/3 to 1/2 of the length of the branch. In order to keep the water clean and increase the dissolved oxygen content in the water, it is recommended to change the water every 3-5 days.

Step 4:

After about 30 days, most cuttings can grow new roots. If the root length is about 5 – 10 cm, a low concentration nutrient solution can be used to fertilize the plant.

Notes:

 Although the cuttings in the water method are simple to do, the survival rate is high, but sometimes there is a phenomenon that the cuttings are infected with microorganisms from which root rot occurs. At that time, it is advisable to cut off rotten branches. Soak the branches in 0.05% to 0.1% potassium permanganate solution, then wash them with clean water, then continue cutting with clean water.

Also, read about 16 Types of ornamental plants that can grow in water.

How to care for Indoor water plants after planting

Care-Indoor-Water-Plants

After the process of growing plants, how care for aquatic plants is also very important as follows:

Indoor water plants are quite easy to care for, don’t forget to change the water regularly for plants, but only 1-2 times a week; you can add a little nutrient solution so that plants grow quickly.

Note, you must replace the water for plants with clean water so that the plants are not contaminated with harmful substances, especially when there are many types of cleaning chemicals, such as chlorine, in the tap water.

So, if you want to use tap water, you can leave it overnight or leave it in the sun to get rid of the chlorine smell.

On dry days, the plant grows quickly, so you should remember to change the water every 3-5 days; on cold days with high humidity, you should only change it every 7-10 days.

When detecting damaged roots or rotting plants, you should change the water for the plants, cut off the rotten roots, and wash but not damage the roots.

Remember to regularly take yellow leaves, leaves with patterns, clean the glass vase to remove dirt in the pot.

The amount of nutrient solution added to the aquarium also needs to be adjusted for each type of plant, if the concentration is too high, the plant will rot and die, so please check with the nutrient solution seller (read instructions) for the right amount of solution for growth.

Where are table water plants usually placed?

Placement-Indoor-Water-Plants

Indoor Water Plants are the perfect decoration to help your desk be luxurious, and beautiful and present a very attractive workspace.

All kinds of indoor water ornamental plants help regulate the air very well, filter dust and toxic gases in the room, allowing you to breathe fresh air while working, concentration efficiency and creativity will be higher.

If placed on a table, you can choose the right size of the pot, the glass vase should not be too large to block the entire work area and the view of the seated person.

The characteristics of water plants are soft and easy to move in the water, this is the advantage. Therefore, this plant brings its own charm and is liked by many families, often planted to decorate the home space.

Related posts

Leave a Reply

Your email address will not be published.